Product name: Fluorescent powder coatings
General introduction:
This powder coating product is made by adding special fluorescent pigment on the basis of general coating, with special bright red, orange, yellow, green and other colors, used for fitness, leisure, sports equipment, fire equipment, road signs and so on.
Product series: Can provide indoor, outdoor different gloss products.
Physical properties:
Specific gravity(g/cm3, 25℃): 1.0-1.4
Particle size distribution: 100 % less than 100 micron (It can be adjusted according to the special requirements of coating)
Coating performance:
|
Testing item
|
Inspection standard or method
|
Test indicators
|
|
impact resistance
|
ISO 6272
|
30kg.cm
|
|
cupping test
|
ISO 1520
|
5mm
|
|
adhesive force(row lattice method)
|
ISO 2409
|
0 level
|
|
bending
|
ISO 1519
|
4mm
|
|
pencil hardness
|
ASTM D3363
|
HB-H
|
|
salt spray test
|
ISO 7253
|
>400 hours
|
|
hot and humid test
|
ISO 6270
|
>900 hours
|
Average coverage: sq.m./kg
Packing and transportation: The cartons are lined with polyethylene bags, net weight is 20KG
Storage condition:
Store in a ventilated, dry and clean room at 30℃, not close to the fire source, central heating and avoid direct sunlight. It is strictly prohibited to pile up in the open. Under this condition, the powder can be stored for 6 months. After the storage life can be re-examined, if the results meet the requirements, can still be used. All containers must be repackaged and repackaged after use.
